1. Injection mold with movable molding parts
Due to some special structures of plastic parts, it is required that the injection molding be set as movable molding parts, such as movable punches, concave molds, movable inserts, movable thread cores or rings, etc., when demoulding is performed It can be moved out of the mold together with the plastic parts and separated from the plastic parts.
2. Automatic thread unloading injection mold
For threaded plastic parts, when it is required to be automatically demolded, a freely rotatable threaded core or ring can be set on the mold, and the mold opening action or the rotation mechanism of the injection molding machine can be used to drive the threaded core or The threaded ring turns and comes out of the plastic part.
3. No runner injection mold
The runnerless injection mold refers to the method of adiabatic heating of the runner, and the plastic between the nozzle and the cavity of the injection molding machine can be kept in a molten state, so that there is no gating system when the mold is opened and the plastic part is taken out.
4.the injection mold of the mold release mechanism on the fixed mold
In the injection mold, the ejection device is installed on the side of the movable mold, which is of great help to the ejector device in the mold opening and closing system of the injection molding machine. In actual production, due to the shape limitation of some plastic parts, it is more helpful to leave the plastic part on the fixed mold side.

Other Product

Aluminum Mascara tubes